Van Der Valk Galv Roof carrier spec. L=4200x1,5mm
Product Information 
Product Description 
Data Sheet ValkPro+
Van der Valk ValkPro+ PV mounting system is available in East-West or South arrangement and has a tilt angle of 10°. Both Landscape and Portrait mounting is possible. With a mounting speed of 3 minutes per panel, ValkPro+ is very quick and easy to apply in your desired setup. ValkPro+ is prepared for grounding and lightning protection thanks to the metal couplings.
ValkPro+ galvanised roof carrier
Van der Valk's ValkPro+ galvanised steel roof rack is used to secure the PV installation on flat roofs. The roof rack is placed over the middle of the tile rack and can be extended with a second roof rack, using the coupling piece. Then the roof rack can be screwed down with a hammer head. The aluminium feet can easily be installed into the carrier, without any tools necessary.
To neatly secure the cables and connectors to the side of the roof rack, a multi cable and connector clip can be clamped around it. It has a size of 4200×1.5mm and comes with an 87mm coupler.
The roof carrier 4200x1,5mm can be integrated into the ValkPro+ Portrait 10° East-West system.